Install
1) Clean the unit’s surface as thoroughly as possible.Use
rubbing alcohol on a lint-free cloth to remove any grease or
other contaminates. Most issues of non-sticking are due to some type of oil or grease. 2) Peel one piece of PS4 Decals from the paper liner. NOT to let the adhesive side touch anything.
3) Determine the placement, apply the Skin to the surface
using your fingers or the side of your thumb, starting from
one corner and working your way across the surface.
4) If a piece is not going on straight, you can gently lift it
back up. Do not stretch it from its original size.
5) If installed slowly and carefully, there should be NO air
bubbles left under the sticker. Any air that may become
trapped during installation will go away in time.
6) During the cold weather or for a better result, apply hot
air to the decal surface by using a hair dryer or hot air gun
to activate chemical agent while putting the sticker.
Especially heat up the edge surface. Allow at least 3 hours
for cool down before touching the decal sticker skin

Product Features

• PlayStation 4 skins preciously fit PlayStation 4 Controller (Controllers not included), it is easy install and removal, not leave behind residue on your dualshock 4 remote controllers decals
• the games skins vinyl decals will prevent your Sony Play Station 4 remote controllers from dust proof, waterproof, oil proof and fingerprints.
• Installation – To install: 1. Clean PS4 accessories surface thoroughly 2. Put on each piece of vinyl decal carefully 3. Apply hot air to PS4 remote play decal surface for a best result by using a hair dryer or hot air gun.
• Give your dualshock 4 game controller a new and cool look. ( Controllers not included)